Updates and Twatnot...

I managed to get through the dental travails, none the worse for wear. I think we’ve settled on this new dental clinic as our permanent choice. They don’t push unnecessary procedures, and the appointment and co-pay process is painless. Aeyong has been there a few times, and things have gone relatively smoothly.

This spring has been a wet one for North Texas, and as luck would have it, the rains have come at a very inopportune time for us. I had started to address some bare spots in the lawn with a seed fabric (Growtrax), and while I was in the process, I thought it would make more sense to try and rejuvenate the entire front yard. Mother nature thought otherwise. The fabric is susceptible to high winds and heavy rain. We tried to time the installation for a calm day, which was several days before the next rain forecast.

We didn’t look close at the rain forecast, it was predicted at around 50% so we didn’t have much concern. Famous last words. We received record rainfall that weekend and similar torrential rains for the next two weekends. Much of the material and seeds washed out, leaving the lawn with many bare spots. I decided to put any lawn rejuvenation on hold until the spring rains had died down. That means late June at the earliest.

In the meantime, I think it was sometime in May that the upstairs HVAC started struggling. To cut the story short, several different companies came out, and all of them recommended a new system (surprise, surprise). We got a fairly wide range of estimates, none of which were cheap. During this process, an HVAC contractor (Atlas AC) that hosts a YouTube channel came up in my feed. I had watched a few of their videos and liked their transparency about the process and prices. As luck would have it, they are headquartered in Texas, and they serve our area.

They publish all their prices online, and there’s a tool to design your own system and get a cost estimate. The prices were much more reasonable and I didn’t have to worry about any gotchas or last-minute changes. I had them come out and estimate our needs, and then we purchased the new system. We had a few payment options, including paying cash outright, using our credit cards, or financing it through their affiliated credit company, CreditHuman.

We didn’t want to take on more debt just as we were getting close to paying off the only remaining debt we had, which was our mortgage. But, we didn’t want to use our emergency cash to pay for something we could get financed. We decided to withdraw $5K from our TSP (IRA), which has had a good year. We’ll end up paying a 10% early withdrawal penalty in addition to taxes, but for something as important as HVAC in Texas, we decided this was a worthy exception.

The install didn’t go as smoothly as desired, we had everything from one of the installers falling off the attic ladder (due to their own incompetence) as well as the outside condenser getting dented at some point in the delivery and installation process. The good news is that Atlas AC stands behind their services and products, and they came back out to replace the damaged condenser with a new one and assess and clean up some residual trash and damage. They also installed two new closet AC runs that were supposed to be installed during the initial visit. During the first visit, the installer removed the attic ladder hinges and springs, and when they put them back together, they didn’t replace some framing nails holding the ladder securely. The installer also damaged our wall when he fell. Atlas AC scheduled a handyman to come out and repair the damage. He’s been out to check and should return sometime next week to make the repairs. All’s well that ends well, and overall we’re happy with the result and will probably use them again when the downstairs unit inevitably needs replacement.

I’ve continued on my primary creative disciplines of 3D and guitar. The other disciplines have been on hold with all the additional concerns of the lawn, HVAC, Aeyong’s medical issues (routine) and the thousand little daily distractions. I resume my guitar studies at Berklee on Monday week, so I’ve been reviewing all the level 1-3 material as well as starting on the level 4 material. I should have enough remaining benefits to complete the Guitar Performance degree with only one semester of the private guitar instruction remaining that I’ll have to pay for myself. I’ve fought against a lack of motivation for more of the theory fire hydrant, but I know that if I don’t take advantage of these remaining benefits, I’ll likely look back on it as a failure. I hope with some deeper immersion (meaning more dedication to the guitar program), that I’ll finally be able to absorb this knowledge and these techniques into my automatic vocabulary on the instrument. All with the main goal of writing great songs, and not necessarily in line with the focus and intent of many of Berklee’s instructors.

As time is of the essence, I decided to try and finish (reset) my yard renovations before the start of the summer semester. While we were laying the yard fabric, a part of one of the rolls came loose and a bunch of seeds spilled out in a pile. We had already laid fabric around it and didn’t want to walk on it, so we just left the pile as it was. Lo and behold, that particular patch was the only part of the new lawn that grew in as thick and lush as we desired. The remainder of the fabric grew in sparse and thin. The good news is I finally have evidence that a thick, lush lawn is possible if the appropriate steps are taken.

I ended up watering with less volume but more frequently that I had with new seed in the past. The other lesson I think I’ve learned is that I need to ensure the seed is at least partially pushed into the soil as opposed to just broadcast spreading and hoping for the best. To that end, I decided to follow the lead of some successful YouTubers and employ several techniques for the first time. Namely, I’m getting five yards of enriched topsoil delivered so I can level out several low areas while providing a nutrient-dense base for the new seed. I’ll be using a lawn levelling rake to get the topsoil spread and levelled, and then I’ll probably give the topsoil a light scarification before laying down a new seed. I’ve purchased some common Bermuda with added fertilizer and some premium Bermuda hybrid seeds. Yesterday I scalped the lawn (for the second time this year), scarified the soil, and then laid down the Anderson’s PGF fertilizer in preparation for the new topsoil coming next week. I also need to install this yard barrier against the sidewalk to keep the new topsoil from washing out on the sidewalk.

When I ordered the topsoil, there was no rain forecast for the next several weeks, but, when I looked at today’s forecast, next week there is now, wait for it, rain in the forecast. I’ve already pulled the trigger on the topsoil and paid for it, and with Berklee starting up again the following week, there won’t be another good time until the fall. I don’t want to try to replant the yard during the hottest time of the year (July-August) despite reports that Bermuda can handle it.

Developments or Not

We’re beginning the transition into Texas summer and the lovely swelter of many months. We still have some relatively mild weather for the next few weeks, so I’ve been checking off my yard reboot task list. As of yesterday, I’ve completed manual aeration of both front and back yards, and I fertilized and seeded the front on Tuesday. Today I’ll finish that off for the back yard. The ratios and spreader settings are a bit sketchy, but I was trying to follow the recommendations from the soil sample testing I had done. As I may have mentioned, our yard was deficient in most nutrients, with only calcium and sulfur being overly abundant. I’m curious if that’s an issue of toxicity, or it just lays inert, so to speak, if the plant life isn’t using it. This is based on the assumption that my core sample mixture was representative.

Core aeration is not something I wish to perform manually for the entire yard again. It’s a tedious and cumulatively arduous task that would go exponentially faster with a machine. I ran into enough roadblocks trying to rent one or get the service performed that I got fed up and just decided to pay $36 and do it myself. I don’t regret the decision and the tool will come in handy in the future, because I’m sure there are nooks and crevices that the machine can’t reach. That said, my plan for the future is to hire a guy (as you do) to have this service performed in the fall and spring. This is assuming I can see some tangible improvements. Hopefully, the assortment of interventions (dethatching, scarifying, raking, aeration, raking, seeding, fertilizing, mowing, watering) will pay off with a thick, and dark green lawn. I have some iron supplement to provide more color if needed, but I’m holding off on that until the new seed is established.

The soil test lab recommended potash and phosphorus as well as “my choice of micronutrients” to get the soil into shape. I’m not sure I got the ratios right, but hopefully there’s enough of the potassium and phosphorus in particular to make up the deficit. I followed those two select ratios with your more standard fertilizer comprised of nitrogen and the typical cross section of micronutrients. Hopefully this won’t burn out the lawn. It’s a lot of supplements at once, hopefully in the future I’ll only need one standard fertilizer to complement the overseeding.

Despite waxing agricultural, I don’t want to dedicate any more time to this than is absolutely necessary. Our yard/soil had been neglected or at least hadn’t had focused supplementation since we moved in, so it was due for more TLC than would normally be necessary. We’ll see how things go. I’ll be watering twice daily for the next few weeks (not counting rainy days) so hopefully the new bermuda seed will germinate and take root. We have a few large bare patches in the back yard that are competing with trees and a reduced amount of sunlight exposure. I’ll see how overseeding goes there. We may eventually decide those areas should just be patios. One project at a time.

I got a second set of overhead storage shelves for the garage, but I’m going to delay installation until next week. We also got a paint sprayer so we can hit the garage door and fence, but that’s also going to wait until at least next week. I’m only going to engage in time-swallowing projects one day at a time. Today I’ll complete the back yard fertilization and overseeding since there’s a limited amount of effective time after aeration that it will make a difference. I think the aeration should have some long term benefits beyond just the seeding/fertilization, mainly in drainage and water/nutrient distribution, but the time for overseeding/fertilization is within 48 hours of aeration.

Continuing on this post a day later - I discovered my core aeration efforts in the front yard are giving me some extra work and additional practice at sprinkler system repair. To my chagrin, I learned the drip tubing on the streetside strip is only buried about 3-4 inches deep, so the core aerator punctured the lines in several locations. I’m going to need to buy a roll of tubing and some connectors and perform several repairs. As I’ve stated before in many different contexts, failure can be a great teacher.

I had performed a few google searches about sprinkler pipe depth but I guess I was using the wrong nomenclature and I should have searched drip tubing. When I searched for underground sprinkler rubber tubing repair I eventually discovered it’s called drip tubing in the industry and now I know it’s buried at a shallower depth. Not a devastating error, just some more sweat equity and a serving or two of humble pie.

Although not my intention, each project seems to beget more projects. My hope is to get most of this lawn and short term DIY stuff knocked out so I can get back to my core (no pun intended) disciplines. I definitely plan on availing myself of the core aeration service in the fall.

I took the Pathfinder in for an estimate of repairs to fix the gas neck issue that’s plagued us for years. I had found a service bulletin which I assumed meant it was a recall type issue, but I’ve learned that even though a service bulletin might get published, it doesn’t equate to a recall. So, I paid $120 to have Don Davis Nissan tell me it will be an additional $405 just to get a look at what’s wrong in particular.

No idea of what additional costs I might have to pay to actually get it fixed. It’s a pain in the ass to fill it up, but not a $500 to possibly $1000 (or more depending on how gougy they feel on that particular day) of a pain in the ass. I’ll just suck it up with my slow fill ups every couple of weeks. I only use it two days a week and eventually I want to get an electric car, but I’m putting that off until well after we pay off the house if possible.

On the workfront, things have settle into a tolerably predictable flow with VES. I’m slowly learning the techniques to avoid QA addendums. It goes against my long established habits when working directly for the VA, but ultimately it’s a losing battle against their policies, so I’ve adjusted to their preferences. I’ve learned that you really only want to address exactly what’s on a claim unless it’s a gen med “all conditions found…” type of exam. They invariably will ask to remove any conditions not mentioned on the claim, whether they are valid or not.

The DBQs are so much more convoluted on the VES side, and just ripe with opportunities for errors of omission. That’s one of many things I preferred about the VA’s version. Auto-negative functions like greying out irrelevant follow-up question were pretty standard, but the QA on the actual forms themselves is significantly lacking at VES. I guess they prefer to pay people to do it rather than build it into the forms.

Also of note, I had gotten a text from a former co-worker stating that “they” were looking to bring me back on as fee-basis at FWOPC. Apparently the low productivity rate of the federales has caught up with them again. Amazing, considering how far their numbers have dropped since most exam requests have been diverted to outside contractors. From what this co-worker said, even the contractors can’t keep up. I’ve seen a few announcements on the VES website that corroborate this, they did request for providers to provide additional booking days if available since there was a backlog.

All that said, I haven’t heard a peep so far. The co-worker had said they only wanted to ask me to come back, which indicates it’s not an enormous backlog, but in my estimation it’s probably those big cases that all the federales avoid. One big issue is my credentials being expired. In typical VA timeframes, that means it would likely be another 2 months to get me back on board. I’m wondering if they’ll go with a second or third choice from any of the providers who still have active credentials. It wouldn’t surprise me if they’re going for a quick fix and not thinking long term. Letting my credentials expire proves how nearsighted they can be.

If they aren’t willing to make the effort to get my credentials renewed, I’m not confident it would be worth the trouble. I definitely prefer fee-basis as I’m sure I’ve said ad nauseam in the past. The pay is better, the schedule is preferable, and the frustration index is significantly lower. We’ll see. At least I’ve settled into a livable lifestyle with VES and we can maintain this indefinitely if needed.