The COVID-19 Languish and Other Updates (including DIY tedium, consider yourself warned)

This may be the biggest gap between posts in several years. As of my last updates, I was laid off at the end of March, and here we are four months later with no end in sight. This pandemic has shifted mindsets and people’s general philosophies of life and work, and I’ve been no exception. I’ve not been depressed or succumbed to a long term funk, but there has been a shift in purpose and a slowing of pace. I was already ambivalent about many things that other people obsess over, but these tendencies have coalesced further.

To the surprise of no one, the current administration has not only grievously mishandled the pandemic, but they’ve also arguably taken actions to make it worse for most Americans. The US has suffered the worst outcomes from this plague, currently with over 140,000 deaths and nearing four million confirmed cases. Multiple republican lead states tried to rush back into normal operations way too soon and are now seeing spikes in their numbers, notably my home of residence, Texas. Thankfully, the rich have continued to get richer in no small part at the hands of the republican senate and white house. I very naively thought that even they would still possess a shred of ethics and human sympathy given the international disaster, but their greed knows no bounds.

At work, they have nationally adopted a three-phase return to normal operations plan that is mostly based on delaying routine and non-life saving care until the numbers plateau and begin to decrease. It appeared our first efforts to lock down and distance were having a beneficial effect on the trends, but the rush back to “normal” has dealt some severe setbacks so the VA needle has gone back to zero at present. In a recent presentation, the director in Dallas predicted that we were only 1/8th of the way through the pandemic, meaning it would take two years to run its course. There has been some promising news about successful vaccine trials in the UK and elsewhere, so it remains to be seen if we may see a viable and available vaccine by year’s end. That being said, I can only expect our current executive branch will find a way to screw that up as well.

Right now I’d be happy to return to work in 2020, but it’s feeling more and more like it will be 2021 or even later. We’ve been trying to keep our heads above water financially, and so far we’re still holding on. Our cash reserves have dipped from their pre-layoff levels, but we’ve also had several unplanned (and not necessarily essential) expenditures. Among these were a new lawnmower, several new tools (cordless drill, oscillator, etc.), new bulb for the projector, new battery for the Highlander, and the single biggest expenditure - the Gandalf/Frodo masters collection statue I had put a big down payment on last year. I would never have made this purchase in our current situation, but it’s a very limited edition and I would have forfeited the down payment if I canceled. It’s rare enough that I know I can sell it for a tidy sum in the future, although I have no plans to do so.

The tool (and supplies) purchases were part of a DIY project to finally run ethernet to all the rooms upstairs as well as make a modest upgrade to my switching setup. The layoff has shifted a lot of my priorities and I’ve been spending more time on cooking and DIY projects. I’m still practicing guitar, drums, keys, and vocals although bass has been neglected for several months. I also lost the spark for writing, drawing, and Korean language study but I have plans to resume. My typical day has been wake-up/coffee/casual internet, walk the dogs, exercise, and then some combination of practice with maybe some cooking depending on the amount of leftovers available. This is generally followed by maybe some reading, video games, and then television/movies/youtube.

With every day being a blank canvas, I don’t typically push things too hard to completion knowing I’ll have plenty of time to finish them in the future. This has resulted in the ethernet project being strung out over several weeks, although this has partly been predicated by incremental purchases as I’ve realized I need additional items. Ultimately, I’d like to have all my various rooms wired for ethernet and able to access the home network for file sharing at the best possible speeds and security. I’m essentially already there for the critical rooms and I only need to install one more drop in the “Forge” as I’m now calling it. This is the combination drawing/craft table and guest bedroom. The ethernet drop will go in the wall behind the tv and is not a high priority at present. It’s more likely to become useful if I ever place an actual PC or Mac in that room.

I’ve set up a “server” (sans server at present) closet in the video room, along with all the camera supplies. Eventual plans include custom-built shelving along the walls and probably a server rack (and server). These are long-range and likely more dependent on whether I return to work, especially the server. In the immediate future I need to organize the clutter and implement some cable management. I’ve got the ONT cable run from the garage up through the drum room closet and into the attic, then across the attic to my server closet.

A single ethernet cable runs from there to the wireless router in the home theater. This serves the entire house for wireless internet. It feeds a cable that runs back to the old location in the master bedroom closet where a switch feeds drops to several downstairs locations. These came with the house and are unused at present because Aeyong only uses wireless (phone, iPad, MacBook), but I’m leaving them connected in case. Two cables come out of the switcher back up into the attic and feed drops in my control room and drum room, respectively. These were run after we moved in by milestone electric and my recent DIY forays revealed the piecemeal nature of their work.

The installer essentially just found the path of least resistance so he ran the ethernet drop for the drum room down the same hole as the electric wiring and I haven’t looked up close, but I’m guessing it’s the same for the control room. Thankfully this doesn’t seem to have negatively affected the performance, although I may move those drops slightly in the future, time and motivation allowing. I’ve done enough rerouting of cables in the attic that I now have a good idea of where everything enters and exits, so it’s a bit more straightforward, but still a huge pain in the ass. The basic message from my attic is stay out and don’t waste your golden years.

In the process of rerouting cables, I needed to drill down from the attic into walls in several locations including the garage, drum room/closet, and video room. It took a bit of rooting around to find the desired locations, so there was a fair amount of drywall sawing and top plate drilling. I learned in the process that the upstairs wall of the drum room is offset from downstairs by about 6-12 inches. This was discovered by drilling up through the wall of the garage into the floor of the drum room, which, as you may have guessed, was unintentional and highly undesirable. After more measuring and brainstorming, I ultimately decided the best route would be through the drum room closet, as it appeared to be directly above the garage wall where I wanted to come in, largely because that’s where ATT has their breakout box to convert the fiber to ethernet.

Because of these multiple attempts, drywall repair was needed in several places in the garage, drum room, and one small spot in the video room. I also needed to put some spray foam installation to seal those unintended holes in the drum room floor. The initial repairs have now been completed, and just yesterday I sanded the first coat of drywall mud that had been applied. I also decided to try and fix up the rat’s nest of cabling behind my home theater rack. This consists of a new wall plate for the speaker wire, coaxial (direct), HDMI for the projector as well as a small control module for the universal remote/projector. I started that process yesterday and I’m thinking I’m about halfway done. In a recurring theme, the installers of the speaker and ethernet cables went with the easiest possible solution, so I’ve got a metric crap-ton of cabling that was just haphazardly passed through a big opening in the wall.

I was able to install a four-port ethernet jack for the feed from the ATT modem as well as the feedback from the router that runs back to the old master closet switch. The other two ports are active but aren’t needed at present. The router has eight ports, so these have been enough to accommodate all the needs in the home theater proper. I was able to separate the speaker cabling so I will now have the lines from the speakers terminate behind the wall into the plate and then have a separate cable that runs from the plate to the receiver. It’s all connected by banana plugs on both sides. I hope my audio signals (not to mention all the other connections) don’t suffer any degradation due to these attempted upgrades. Worst case scenario, I can always re-run the cabling if necessary, but I really hope I don’t need to do that.

I’ve still got several steps left in this current project including a (hopefully) finish coat on the drywall, texture, and paint. I’ve still got a few small holes in the garage to patch, although they should be a breeze compared to what’s preceded them. I’m also considering adding an electrical outlet to the server closet, but I’m going to save that until all the low-voltage stuff is done and dusted.